X-BULL Gen2-S Off-Road Recovery Traction Boards Recovery Tracks 2 Pairs

Lifetime Service Available

HOW TO USE

CLICK DETAILED INSTRUCTIONS: HOW TO USE RECOVERY TRACKS?

• At first sign of your vehicle being stuck, STOP. Don’t keep spinning the tires- It wont work
• How deep you are and use a shovel to get underneath the tires. Dig a track in front of the front tires too, so there is minimal resistance to the vehicles pathway and you can keep your momentum.
• Air down tires to as much as you are comfortable with (carry a compressor with you- It is an essential trail tool).
• Rocks: 15 psi min.
• Soft Sand: Deep / silt / soft sand 8 psi.
• Beach sand: 10-12psi min.
• Mud: 15psi depending on bottom (compensate for rocks/holes/branches)
• Try and get the tracks up against the tires lowest surface so it can grab a cleat and pull underneath the vehicle. Once the tracks are under the tires, DO NOT increase RPM and spin tires, as this will burn the cleats off of the tracks . Maintain a steady throttle until you feel the truck rise up, then increase throttle until you are completely out of the obstacle and able to gain traction without aide.

Specification:

• Size : 91cm x 31cm x 6cm  -  35.8 x 12.2 x 2.4inches
• Material : reinforced strong nylon
• Specification : 10 ton load capacity
  
• GW : 4.7kg per pair of Tracks  -  10.36 pounds
• Raised tracks help prevent vehicle tires from spinning on snow, sand, mud or ice
• No towing or pushing required
• UV Stabilized-- Resilient design
• Ideal for off-road use
• Prevent your vehicle's tires from spinning when stuck in snow, mud or sand